dmesg - i7 4770k@4.4Ghz
Linux version 4.9.12 (solus@toadstool) (gcc version 6.3.0 (Solus) ) #1 SMP Fri Feb 24 22:44:46 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000be5a5fff] usable
BIOS-e820: [mem 0x00000000be5a6000-0x00000000be5acfff] ACPI NVS
BIOS-e820: [mem 0x00000000be5ad000-0x00000000bf05ffff] usable
BIOS-e820: [mem 0x00000000bf060000-0x00000000bf557fff] reserved
BIOS-e820: [mem 0x00000000bf558000-0x00000000dcbd3fff] usable
BIOS-e820: [mem 0x00000000dcbd4000-0x00000000dcc64fff] reserved
BIOS-e820: [mem 0x00000000dcc65000-0x00000000dcccbfff] usable
BIOS-e820: [mem 0x00000000dcccc000-0x00000000dce0ffff] ACPI NVS
BIOS-e820: [mem 0x00000000dce10000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xbd2b0018-0xbd2d0257] usable ==> usable
e820: update [mem 0xbd2a0018-0xbd2af857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000bd2a0017] usable
reserve setup_data: [mem 0x00000000bd2a0018-0x00000000bd2af857] usable
reserve setup_data: [mem 0x00000000bd2af858-0x00000000bd2b0017] usable
reserve setup_data: [mem 0x00000000bd2b0018-0x00000000bd2d0257] usable
reserve setup_data: [mem 0x00000000bd2d0258-0x00000000be5a5fff] usable
reserve setup_data: [mem 0x00000000be5a6000-0x00000000be5acfff] ACPI NVS
reserve setup_data: [mem 0x00000000be5ad000-0x00000000bf05ffff] usable
reserve setup_data: [mem 0x00000000bf060000-0x00000000bf557fff] reserved
reserve setup_data: [mem 0x00000000bf558000-0x00000000dcbd3fff] usable
reserve setup_data: [mem 0x00000000dcbd4000-0x00000000dcc64fff] reserved
reserve setup_data: [mem 0x00000000dcc65000-0x00000000dcccbfff] usable
reserve setup_data: [mem 0x00000000dcccc000-0x00000000dce0ffff] ACPI NVS
reserve setup_data: [mem 0x00000000dce10000-0x00000000deffefff] reserved
reserve setup_data: [mem 0x00000000defff000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041effffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI 2.0=0xdcdd4000 ACPI=0xdcdd4000 SMBIOS=0xf04c0 MPS=0xfd450
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z97X-Gaming 5/Z97X-Gaming 5, BIOS F5 05/30/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 041E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd730-0x000fd73f] mapped at [ffff8800000fd730]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01f3d000, 0x01f3dfff] PGTABLE
BRK [0x01f3e000, 0x01f3efff] PGTABLE
BRK [0x01f3f000, 0x01f3ffff] PGTABLE
BRK [0x01f40000, 0x01f40fff] PGTABLE
BRK [0x01f41000, 0x01f41fff] PGTABLE
BRK [0x01f42000, 0x01f42fff] PGTABLE
RAMDISK: [mem 0x7ec3b000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DCDD4000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DCDD4080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DCDE4E08 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DCDD4190 010C78 (v02 ALASKA A M I 00000088 INTL 20120711)
ACPI: FACS 0x00000000DCE0E080 000040
ACPI: APIC 0x00000000DCDE4F18 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DCDE4FB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DCDE4FF8 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DCDE5BE8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DCDE6128 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 0x00000000DCDE6CA0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DCDE6CE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DCDE6D18 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DCDE7088 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: BGRT 0x00000000DCDECBE8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
NODE_DATA(0) allocated [mem 0x41eff8000-0x41eff9fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000be5a5fff]
node 0: [mem 0x00000000be5ad000-0x00000000bf05ffff]
node 0: [mem 0x00000000bf558000-0x00000000dcbd3fff]
node 0: [mem 0x00000000dcc65000-0x00000000dcccbfff]
node 0: [mem 0x00000000defff000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
On node 0 totalpages: 4175578
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14045 pages used for memmap
DMA32 zone: 898877 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd2a0000-0xbd2a0fff]
PM: Registered nosave memory: [mem 0xbd2af000-0xbd2affff]
PM: Registered nosave memory: [mem 0xbd2b0000-0xbd2b0fff]
PM: Registered nosave memory: [mem 0xbd2d0000-0xbd2d0fff]
PM: Registered nosave memory: [mem 0xbe5a6000-0xbe5acfff]
PM: Registered nosave memory: [mem 0xbf060000-0xbf557fff]
PM: Registered nosave memory: [mem 0xdcbd4000-0xdcc64fff]
PM: Registered nosave memory: [mem 0xdcccc000-0xdce0ffff]
PM: Registered nosave memory: [mem 0xdce10000-0xdeffefff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:48 nr_cpumask_bits:48 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 34 pages/cpu @ffff88041ec00000 s102168 r8192 d28904 u262144
pcpu-alloc: s102168 r8192 d28904 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4110309
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 16125488K/16702312K available (8074K kernel code, 1135K rwdata, 2252K rodata, 1416K init, 720K bss, 576824K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=48 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:4352 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
tsc: Detected 3500.150 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.30 BogoMIPS (lpj=3500150)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e7f000 - ffffffff81e87000)
ftrace: allocating 29880 entries in 117 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (56030.45 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbe5a6000-0xbe5acfff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdcccc000-0xdce0ffff] (1327104 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
xor: automatically using best checksumming function avx
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2 MB page size, pre-allocated 0 pages
raid6: sse2x1 gen() 14222 MB/s
raid6: sse2x1 xor() 10679 MB/s
raid6: sse2x2 gen() 17718 MB/s
raid6: sse2x2 xor() 12080 MB/s
raid6: sse2x4 gen() 20949 MB/s
raid6: sse2x4 xor() 13054 MB/s
raid6: avx2x1 gen() 27843 MB/s
raid6: avx2x2 gen() 32273 MB/s
raid6: avx2x4 gen() 37851 MB/s
raid6: using algorithm avx2x4 gen() 37851 MB/s
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 15 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040E03E400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040C0E5000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040C732600 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7218000-0xf721800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7216000-0xf72163ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7215000-0xf72157ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7214000-0xf72140ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1969:e091] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf7100000-0xf713ffff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd2a0018-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd2b0018-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe5a6000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf060000-0xbfffffff]
e820: reserve RAM buffer [mem 0xdcbd4000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdcccc000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20244K (ffff88007ec3b000 - ffff880080000000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbacd000-0xcfacd000] (64MB) mapped at [ffff8800cbacd000-ffff8800cfaccfff]
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
pmd_set_huge: Cannot satisfy [mem 0xf1000000-0xf1200000] with a huge-page mapping due to MTRR override.
simple-framebuffer simple-framebuffer.0: framebuffer at 0xf1000000, 0x300000 bytes, mapped to 0xffffc90002000000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
workingset: timestamp_bits=44 max_order=22 bucket_order=0
SGI XFS with ACLs, security attributes, realtime, no debug enabled
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
device-mapper: multipath round-robin: version 1.1.0 loaded
device-mapper: multipath queue-length: version 0.2.0 loaded
device-mapper: multipath service-time: version 0.3.0 loaded
intel_pstate: Intel P-state driver initializing
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x306c3, pf=0x2, revision=0x19
microcode: Microcode Update Driver: v2.01 , Peter Oruba
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Btrfs loaded, crc32c=crc32c-intel
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2017-03-01 10:58:19 UTC (1488365899)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1416K (ffffffff81d1d000 - ffffffff81e7f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 104K (ffff8800017e6000 - ffff880001800000)
Freeing unused kernel memory: 1844K (ffff880001a33000 - ffff880001c00000)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-cryptse: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ahci 0000:00:1f.2: version 3.0
ehci-pci: EHCI PCI platform driver
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215100 irq 24
ata2: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215180 irq 24
ata3: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215200 irq 24
ata4: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215280 irq 24
ata5: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215300 irq 24
ata6: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215380 irq 24
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.12 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.12 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7217000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.12 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7216000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.12 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-9: WDC WD30EZRX-00SPEB0, 80.00A80, max UDMA/133
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD30EZRX-00S 0A80 PQ: 0 ANSI: 5
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-5: new full-speed USB device number 2 using xhci_hcd
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 3-1: New USB device found, idVendor=8087, idProduct=8009
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8001
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
random: fast init done
usb 1-5: New USB device found, idVendor=1b1c, idProduct=1b09
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: Corsair K70R Gaming Keyboard
usb 1-5: Manufacturer: Corsair
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:1B1C:1B09.0001/input/input2
hid-generic 0003:1B1C:1B09.0001: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:14.0-5/input0
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:1B1C:1B09.0002/input/input3
hid-generic 0003:1B1C:1B09.0002: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:14.0-5/input1
input: Corsair Corsair K70R Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:1B1C:1B09.0003/input/input4
usb 1-14: new full-speed USB device number 3 using xhci_hcd
hid-generic 0003:1B1C:1B09.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K70R Gaming Keyboard] on usb-0000:00:14.0-5/input2
tsc: Refined TSC clocksource calibration: 3499.996 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734d20948, max_idle_ns: 440795306379 ns
usb 1-14: New USB device found, idVendor=046d, idProduct=c24e
usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-14: Product: G500s Laser Gaming Mouse
usb 1-14: Manufacturer: Logitech
usb 1-14: SerialNumber: B797FC47660009
input: Logitech G500s Laser Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:046D:C24E.0004/input/input5
hid-generic 0003:046D:C24E.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech G500s Laser Gaming Mouse] on usb-0000:00:14.0-14/input0
input: Logitech G500s Laser Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.1/0003:046D:C24E.0005/input/input6
hid-generic 0003:046D:C24E.0005: input,hiddev0,hidraw4: USB HID v1.11 Keyboard [Logitech G500s Laser Gaming Mouse] on usb-0000:00:14.0-14/input1
clocksource: Switched to clocksource tsc
random: crng init done
PM: Starting manual resume from disk
PM: Hibernation image partition 253:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[276]: Received SIGTERM from PID 1 (systemd).
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
EXT4-fs (dm-2): re-mounted. Opts: discard,errors=remount-ro
systemd-journald[662]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
EFI Variables Facility v0.08 2004-May-17
alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [fc:aa:14:20:42:09]
[drm] Initialized
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
snd_hda_codec_realtek hdaudioC0D2: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
iTCO_vendor_support: vendor-support=0
alx 0000:03:00.0 enp3s0: renamed from eth0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 247
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.39 Tue Jan 31 20:47:00 PST 2017
(using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.39 Tue Jan 31 19:41:48 PST 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-246578da-738d-e6c1-4180-4c05d58ee659) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 12
fuse init (API version 7.26)
alx 0000:03:00.0 enp3s0: NIC Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
lightdm[2538]: segfault at 0 ip 00007f1295971e26 sp 00007fff436708e8 error 4 in libc-2.24.so[7f12958e5000+1bc000]
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 49
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 32
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 10
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 49
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3499988299 Hz
vboxdrv: Successfully loaded version 5.1.12 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 58
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 6
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 80
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 33
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 10
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 54
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 7
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 80
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 33
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 9
traps: budgie-panel[3509] trap int3 ip:7f94f028bd89 sp:7fff717945e0 error:0
in libglib-2.0.so.0.5000.2[7f94f023a000+112000]
usb 1-6: new high-speed USB device number 4 using xhci_hcd
usb 1-6: New USB device found, idVendor=1b1c, idProduct=1a0d
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Voyager GS
usb 1-6: Manufacturer: Corsair
usb 1-6: SerialNumber: 0708483F1578BF95
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-6:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access Corsair Voyager GS 000A PQ: 0 ANSI: 6
sd 6:0:0:0: [sdc] 125042688 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 45 00 00 00
sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sdc: sdc1 sdc2
usb 1-6: USB disconnect, device number 4
usb 1-6: new high-speed USB device number 5 using xhci_hcd
usb 1-6: New USB device found, idVendor=090c, idProduct=1000
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Flash Voyager
usb 1-6: Manufacturer: Corsair
usb 1-6: SerialNumber: A700000000026280
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-6:1.0
scsi 6:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdc] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
engrampa[18153]: segfault at 0 ip 00007f7795661ea8 sp 00007ffd781b3e30 error 4 in libglib-2.0.so.0.5000.2[7f77955e3000+112000]
sdc: detected capacity change from 8053063680 to 0
usb 1-6: USB disconnect, device number 5
usb 1-6: new high-speed USB device number 6 using xhci_hcd
usb 1-6: New USB device found, idVendor=ffff, idProduct=1201
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-6:1.0
scsi 6:0:0:0: Direct-Access NAND USB2DISK 0.00 PQ: 0 ANSI: 4
sd 6:0:0:0: [sdc] Attached SCSI removable disk
usb 1-6: USB disconnect, device number 6
usb 1-6: new high-speed USB device number 7 using xhci_hcd
usb 1-6: New USB device found, idVendor=0951, idProduct=1665
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: DataTraveler 2.0
usb 1-6: Manufacturer: Kingston
usb 1-6: SerialNumber: 50E5495137E5BDC13000012F
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-6:1.0
scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
sd 6:0:0:0: [sdc] 15356160 512-byte logical blocks: (7.86 GB/7.32 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-6: USB disconnect, device number 7
SUPR0GipMap: fGetGipCpu=0xb
yelp[12633]: segfault at 0 ip 00007fd9a80f20a0 sp 00007ffc807cf778 error 4 in libglib-2.0.so.0.5000.2[7fd9a80b7000+112000]
vboxdrv: ffffffffa0747020 VMMR0.r0
vboxdrv: ffffffffa009b020 VBoxDDR0.r0
vboxdrv: ffffffffa0848020 VMMR0.r0
vboxdrv: ffffffffa0148020 VBoxDDR0.r0
nvidia-modeset: Freed GPU:0 (GPU-246578da-738d-e6c1-4180-4c05d58ee659) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 33
nvidia-modeset: Allocated GPU:0 (GPU-246578da-738d-e6c1-4180-4c05d58ee659) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 9
lightdm[22483]: segfault at 0 ip 00007f7569257e26 sp 00007ffceae97628 error 4 in libc-2.24.so[7f75691cb000+1bc000]
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 11
nvidia-modeset: Freed GPU:0 (GPU-246578da-738d-e6c1-4180-4c05d58ee659) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 21
nvidia-modeset: Allocated GPU:0 (GPU-246578da-738d-e6c1-4180-4c05d58ee659) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 18
lightdm[23701]: segfault at 0 ip 00007fb66c64ce26 sp 00007ffd06dd98b8 error 4 in libc-2.24.so[7fb66c5c0000+1bc000]
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 53
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 5
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 50
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 49
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 37
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 53
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 70
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 49
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 50
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 7
nvidia-modeset: Freed GPU:0 (GPU-246578da-738d-e6c1-4180-4c05d58ee659) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 20
chrome[25255]: segfault at 968 ip 00007fb2204b79a0 sp 00007ffe9cef4f00 error 4 in libX11.so.6.3.0[7fb22047d000+15c000]
nvidia-modeset: Allocated GPU:0 (GPU-246578da-738d-e6c1-4180-4c05d58ee659) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 16
lightdm[25316]: segfault at 0 ip 00007f41cb0e1e26 sp 00007ffcde62bdb8 error 4 in libc-2.24.so[7f41cb055000+1bc000]
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 53
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 37
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 45
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 4
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 53
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 58
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 10
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 33
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 10
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 33
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 10
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 58
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 9
usb 1-6: new high-speed USB device number 8 using xhci_hcd
usb 1-6: New USB device found, idVendor=f000, idProduct=fff0
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=7
usb 1-6: Product: RNDIS/Ethernet Gadget
usb 1-6: Manufacturer: Linux 3.4.39 with sunxi_usb_udc
usb 1-6: SerialNumber: ch000001
usb-storage 1-6:2.2: USB Mass Storage device detected
scsi host6: usb-storage 1-6:2.2
scsi 6:0:0:0: Direct-Access 0000 PQ: 0 ANSI: 2
sd 6:0:0:0: [sdc] 4194304 512-byte logical blocks: (2.15 GB/2.00 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 0f 00 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:
sd 6:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdc: detected capacity change from 2147483648 to 0
usb 1-6: USB disconnect, device number 8
usb 1-6: new high-speed USB device number 9 using xhci_hcd
usb 1-6: New USB device found, idVendor=f000, idProduct=ff13
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=7
usb 1-6: Product: RNDIS/Ethernet Gadget
usb 1-6: Manufacturer: Linux 3.4.39 with sunxi_usb_udc
usb 1-6: SerialNumber: ch000001
usb 1-6: USB disconnect, device number 9
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
comar[14257]: segfault at 0 ip 000000000040b830 sp 00007ffd6b643300 error 4 in comar[400000+12000]
usb 1-6: new full-speed USB device number 10 using xhci_hcd
usb 1-6: New USB device found, idVendor=0a12, idProduct=0001
usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-6: Product: CSR8510 A10
usb 1-6: USB disconnect, device number 10
usb 1-6: new high-speed USB device number 11 using xhci_hcd
usb 1-6: New USB device found, idVendor=ffff, idProduct=1201
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-6:1.0
scsi 6:0:0:0: Direct-Access NAND USB2DISK 0.00 PQ: 0 ANSI: 4
sd 6:0:0:0: [sdc] Attached SCSI removable disk
usb 1-6: USB disconnect, device number 11
usb 1-6: new high-speed USB device number 12 using xhci_hcd
usb 1-6: New USB device found, idVendor=ffff, idProduct=1201
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-6:1.0
scsi 6:0:0:0: Direct-Access NAND USB2DISK 0.00 PQ: 0 ANSI: 4
sd 6:0:0:0: [sdc] Attached SCSI removable disk
usb 1-6: USB disconnect, device number 12
upowerd[2617]: segfault at 20 ip 00007efe4a814bc0 sp 00007ffddd695cd8 error 4 in libglib-2.0.so.0.5000.2[7efe4a78b000+112000]
upowerd[25787]: segfault at 20 ip 00007fb6d46b9bc0 sp 00007ffe07006fd8 error 4 in libglib-2.0.so.0.5000.2[7fb6d4630000+112000]